The process of installing an LED luminaire is not complex, but as with other installations, doing it the right way completely determines the result you can get.
Do you want to know how to install an LED luminaire to get the most out of it? We tell you how.
How to place or install led light fixture step by step
1. Look at the instruction booklet
Although at the beginning there was not so much variety of luminaires and most of them are installed in a similar way, nowadays there are very different LED luminaires depending on the room or use, with different transformers or drivers, and precisely, for this reason, its installation can vary greatly. Therefore, to know how to install a particular LED luminaire, it is best to go to the instructions, where you can see step by step how to place it so that it works perfectly. You should keep in mind that the installation of LED luminaires is no longer something standard applicable to all, but rather a custom installation for each one, so it may be that, even if you have already installed others previously, you can not follow the same steps for all of them. To avoid the most typical mistakes such as making a parallel connection when it should be in series or connecting an LED luminaire directly to the current when it would need a driver, the instructions are the key. Remember that they are designed for safe installation, and following them to the letter will save you time and money.
2. Cut the light before installing
Of all the tips we can give you on how to install an LED luminaire, this is undoubtedly the most important. Remember that during the installation you may be in contact with the electric current, so the safest thing to do is to disconnect it before starting, your safety comes first.
3. Have the right tools
Knowing how to install an LED luminaire also means knowing which tools to use. As we have mentioned, the installation of each luminaire can vary greatly, and the same goes for the tools you will need. This point is undoubtedly something key to be able to continue with the installation, and the most that can happen is that you have to buy a couple of things you didn't count on. In any case, for any light fixture installation you will need some basics:
- Screwdriver
- Drill
- Wire stripper
- Drill bit
- Plugs
4. Use the right cue for the ceiling where you are going to install it
As with the diversity of luminaires, ceilings also have their peculiarities and is that to know how to place an LED luminaire correctly, one of the factors that you must take into account is the type of ceiling in which it is installed and the dowel used for it. While plasterboard ceilings are advised to use plasterboard dowels, standard dowels are used for billet or brick. Tipping plugs, on the other hand, are for heavier luminaires, so they are more resistant and adapted to the weight they must support.
5. Use terminal strips for the electrical connections.
One of the most important points when it comes to knowing how to install an LED luminaire, is to know the importance of using terminal strips for electrical connections. Although many people tend to use insulating tape, following our advice will not only ensure the expected result, but you will also be taking care of your safety.
Install with a qualified installer
Although anyone can install an LED luminaire as long as they follow the previous tips we have explained, within an architectural and interior design project it is best to use a qualified installer. A professional who knows the installation process of each luminaire, the necessary tools, and all the key points to do it safely, is certainly an option that will guarantee good results. At FARO Barcelona we are specialists in LED luminaires, and we know perfectly not only the installation processes but also the most common failures and their consequences. Follow our tips on how to install an LED luminaire and you will be able to do it in the safest and most satisfactory way. And if you prefer to entrust the job to experts, contact us and we will be happy to help you.
